Honeywell Rapid Eye, Administrator'S Manual

Page: 41 / 294

Document 800-02953V4 Rev A 41
03/10
3
Connecting to a Rapid Eye Unit
Working with Connections
Coordinating with the Installer
If a connection was set up by the installer and you are accessing the Multi db created by
the installer, the connection will be listed under Connections to the Site (see
Figure 3-1 ).
One connection, or many, can be setup; for example, to operate a unit through a network,
and by local dial-up.
Using Admin Software
Admin software is used to set up, or modify, a connection to a Rapid Eye unit. Figure 3-1
shows how to add a connection. Add a connection while Updating a Site , page 37 , or
while Adding a Site , page 35 . A connection is made using the View software.
Figure 3-1 Adding a Dial-Up Connection to a Site