Honeywell Rapid Eye, Administrator'S Manual

Page: 242 / 294

242
Archival Policies
Figure 12-5 Adding Sites to an Archival Policy
9. The archival time is displayed next to the site names (see below). The default archival
time is the half hour that includes the current time (time when policy was created).
Figure 12-6 List of Sites Associated with a Policy
Note Archiving data during the daylight saving time switching period may cause
some difficulty. We recommend that you create a clip specifically for the
switching period to ensure the data is safely backed up.
10. To change the archival time (see Figure 12-7 ):
a. Select one or more sites in the Sites Associated with this Policy table.
b. Click .
c. Use the appropriate drop-down arrows to change the From and To archival
Times. If you are using an Immediate Archival Policy, you can also change the
From and To archival dates. Click Save and Close.
Figure 12-7 Updating a Site
Cameras 1 to 16 will be listed here for
each unit. The number of cameras
displayed is not dependent on the
number of cameras connected to the
unit. Archiving will only occur for
connected cameras.
Point-of-sales (POS) streams are not
listed here. By default, all POS streams
are included in the archives.
Note
If a site uses
multiple connections,
only the primary
connection will be
used for archiving.
Note
Archiving will happen in
the order listed here, one at a time.
In this example, unit 001, or Main
Unit, will archive first and unit 002
(Multi-Media RU) will archive next.
Data is backed up between the
From and To times listed.
Scheduled
Archival Policy
Immediate
Archival Policy