Honeywell Rapid Eye, Administrator'S Manual

Page: 256 / 294

256
Touring Many Sites
Changing the Time Spent at a Site During a Tour
1. Using Admin, click the Tours tab.
2. To display the Update Tour dialog box, do one of the following:
• Double-click the name of the tour that you want to customize.
- or -
• Select the tour that you want to customize, then either: click on the toolbar,
Update in the Actions menu, or press the F12 key.
Figure 13-3 Customizing the Duration of a Multi-Media Unit in a Tour
3. In the Add/Update Tour dialog box, do one of the following:
• Select a site, then click .
- or -
• Double-click the name of a site.
4. In the Duration field, you can adjust the minutes or seconds to change the time spent
at the site, as needed (see
Figure 13-3 ).
5. Click Save and Close.
TIP! Should you plan to view a site for long periods, say thirty minutes or more, consider
using a Live Session instead of changing the durations of time spent at each site.
Selecting Another Connection to a Site During a Tour
1. Using Admin, click the Tours tab.
2. To display the Update Tour dialog box. Double-click the name of the tour you need to
customize.
3. Double-click the name of a site.
4. Click the drop-down arrow next to the Connection box. There may only be one
connection to select. Connections are defined while adding or updating a site. See
Connecting to a Rapid Eye Unit on page 41 .
5. Select a connection type used for the site during the tour.