Honeywell Rapid Eye Administrator'S Manual Download Page 216

Page: 216 / 294

216

Security for a Multi-Media System

Either:

•

Select the Deny access to sites option so that it displays a checkmark.

- or -

•

Remove the account’s rights by clicking the checkbox for each Right until each
checkmark is removed.

Click Save and Close.

Using View, start a

Maintenance Session

at the site where access must be stopped.

On the Security tab, click Update Security.

Removing Multi-Media Software

To remove Multi software from a PC, a Microsoft Windows procedure is used:

On the Windows desktop, click Start.

Click Control Panel.

Double-click Add/Remove Programs.

On the Change or Remove Programs tab, use the scroll bar to locate the Rapid Eye
Multi program. Select either:

•

Rapid Eye Multi-Media Admin and View [version number].

- or -

•

Rapid Eye Multi-Media View [version number].

Click Change/Remove. Follow the InstallShield utility instructions to remove the
software from the PC.

Caution

It is not recommended that you use Windows Explorer to delete Multi
executable files. Multi software uses registry keys that may also need to be
removed. Please use the above procedure to remove the software.

Summary of Contents for Rapid Eye







































































































































































































































































































Search results

Summary of Contents for Rapid Eye

Reviews:

Related manuals for Rapid Eye

Brands by name

Popular brands

Honeywell Rapid Eye, Administrator'S Manual

Search results

Summary of Contents for Rapid Eye

Reviews:

Related manuals for Rapid Eye

Brands by name

Popular brands