Honeywell Rapid Eye Administrator'S Manual Download Page 257

Page: 257 / 294

Rapid Eye Multi-Media DVR System Administrator Guide

Document 800-02953V4 Rev A

257

03/10

If needed, click Save and Close. Change the amount of time that the site will display
for in the site tour (see

Changing the Time Spent at a Site During a Tour

on page

256

Close the Add/Update Tour dialog box.

Removing a Tour

Using Admin, click the Tours tab.

Select the tour that you want to delete.

Do one of the following:

•

Click

on the toolbar.

•

Click Delete on the Actions menu.

- or -

•

Press the Delete key on the keyboard.

You are warned that the tour is about to be deleted. Click Yes to continue or No to
cancel.

Summary of Contents for Rapid Eye







































































































































































































































































































Search results

Summary of Contents for Rapid Eye

Reviews:

Related manuals for Rapid Eye

Brands by name

Popular brands

Honeywell Rapid Eye, Administrator'S Manual

Search results

Summary of Contents for Rapid Eye

Reviews:

Related manuals for Rapid Eye

Brands by name

Popular brands