Honeywell Rapid Eye, Administrator'S Manual

Page: 238 / 294

238
Multi-Media Alarm Stations
Tracing a Unit Sending an Alarm
To trace a unit sending an alarm, either:
• A View operator can make a note of the unit’s serial number and IP address indicated
in the message.
- or -
• A Multi SA can consult the alarm log.
Note Before de-listing a Rapid Eye unit from a Multi-Media database, Honeywell
recommends that your Multi SA use the Admin application to remove alarm
stations listed in a site definition. See
Stopping a Site from Reporting to a
Specific Alarm Station on page 238 .
Stopping a Site from Reporting to a Specific Alarm Station
1. Using Admin, select the Sites tab.
2. Double-click the site that you plan to remove. An Update Site dialog box appears.
3. Click in the Report Alarms to these Alarms Stations pane. The Add/Delete
Stations to Call in Case of Alarms dialog box appears, displaying a list of alarm
stations. Stations already assigned to the site are listed the Report Alarms to column.
4. To move alarm stations back to the available Alarm Stations column, either:
• Select one or more station names in the Report Alarms to column, then click the
left-arrow (<).
- or -
• Double-click the stations that you want to move.
5. Click Save and Close. The Update Site dialog box reappears, listing the alarm
stations in the Report Alarms to these Alarm Stations pane.
6. You have the option of ending the site edit. To do so, click Close. The Admin window
reappears, listing your system’s sites on the Sites tab.
7. Use the View application to start a Maintenance Session for the Multi-Media unit that
you plan to remove.
8. Click Update Security on the Security tab of the Maintenance Session . Information
from the Multi db is copied to the Multi-Media unit. Please wait until
Updated
security
appears in the Feedback field.
9. Close the Maintenance Session .
10. Using Admin, remove the site (see Deleting a Site on page 37 ).
11. Using View, click Refresh.