The CP-220A has been factory programmed so that Codes 0-9 display the
default words, as follows:
CODE
ENGLISH WORD
CODE
ENGLISH WORD
0
ZERO
5
AUXILiARY
1
FIRE
6
BYPASS
2
PANIC
7
INACTIVE
3
BURGLARY
8
EIGHT
4
MEDICAL
9
NINE
Replacing the standard
FBI Superfast
message (like the one at the upper
left) with one using descriptive words (like the one beneath it) to
characterize specific events is clearly in the best interests of the Central
Station's operators. With this parameter, each of the default words used in
the above table can be re-programmed to better describe the event, if
necessary, and be used to supplement the basic numeric reporting of the
FBI
Superfast
format.
To do so, movement between the
Slot Number,
the
Code Number,
and the
respective words
on the display (see page 2-44), may be accomplished with
the
and
keys as shown in the procedure that follows:
Programming Procedures:
1. Note that after entering
PARAMETER 47,
[FBI ENGLISH 0 ZERO]
appears on the display and the [0] is flashing. To change default word
[ZERO] associated with Code [0], proceed to the next step. To select
another code number, press (between
1
and
9
) representing the code
whose descriptive word you wish to change.
2. Press
the key once to advance the flashing cursor to the first letter of
the descriptive word you wish to change. Press the
NEXT
key, one push
at a time. Doing so takes the first character incrementally through the
following sequence of characters, which repeats itself:
• letters of the alphabet
• blank space
• numbers 0 through 9
NOTE 1: The
MANUAL/PREVIOUS
key may be pushed momentarily to
move backward through the set of characters if it's easier to
reach the desired selection that way.
CP-220A Central Station Receiver Section 2: Programming the CP-220A Page 2-45
Hook-Up and Installation Manual
1234 11 016
FBI SUPERFAST REPORTING
1234 FIRE 10 016
CUSTOMIZED SUPERFAST
REPORTING
