REMEMBER!
To leave the Programming
Mode at any time, press the
Esc
key. Doing so will
return the CP-220A to its
normal operating mode.
Programming changes will
be stored automatically.
PARAMETER 53:
Acron 11-Digit
With Zero or
Space
Data received by the
CP-220A in the
Acron
Superfast
format and
transferred to the
Automation System
through the receiver's
DTE Port
is assembled
as shown at the right.
PARAMETER 53
is
used to determine what
the first character of the
Account Number will be
if only three digits are
being used.
NOTE: The
Automation System
must support the
XON/XOFF
"handshaking" technique, or the default of [00] must be
programmed
.
Default:
PARAMETER 52
is defaulted to [XOFF 00].
Advancing to Next Parameter:
After programming
PARAMETER 52,
press the
N
key to advance to
PARAMETER 53
– the next parameter in
Category C
.
The CP-220A displays the parameter just programmed ([PARAMETER
NUMBER 52]) with its first digit flashing, indicating its request for the
next parameter number. Press either:
•
5
then
3
, or
• then
key and
3
, or
• the
key
NOTE: When the
is used, the
name
of the next parameter appears
immediately – not its
number.
ACRON 11 DIGIT W/ZERO MM/DD/YY HH:MM:SS
Background:
When the CP-220A receives a message in the
Acron Superfast
format, it
outputs the message to its
DTE
(and
DCE
) ports in the manner depicted
below:
CP-220A Central Station Receiver
Section 2: Programming the CP-220A Page 2-99
Hook-Up and Installation Manual
