4.18 Siderail Retraction Assembly
Chapter 4: Removal, Replacement, and Adjustment Procedures
Page 4 - 42
Basic Care™ Bed Service Manual (man336)
4.18 Siderail Retraction Assembly
Tools required:
4 mm Allen™
1
wrench
4 mm T-handle Allen™ wrench
Phillips head screwdriver
Screwdriver
Removal
1. Raise the bed to the highest position.
2. Lower the siderail (A) to the down position (see figure 4-18 on page 4-42).
Figure 4-18. Siderail Retraction Assembly
3. Remove the two screws (B) attaching the lower bar (C) to the siderail (A).
NOTE:
The spring assemblies will move up suddenly, and hit the top cane.
1. Allen™ is a trademark of Industrial Fasteners, Inc.
030
