manualshive.com logo in svg

Hill-Rom Basic Care P1440, Service Manual

Share
Download
Hill-Rom Basic Care P1440 Service Manual Download Page 143

Preventive Maintenance

Chapter 6: General Procedures

Basic Care™ Bed Service Manual (man336)

Page 6 - 5

6

Preventive Maintenance

WARNING:

Only facility-authorized personnel should service the Basic Care™ Bed. 
Servicing by unauthorized personnel could result in personal injury or 
equipment damage.

It is necessary for the Basic Care™ Bed to have an effective maintenance 
program. We recommend that you do annual preventive maintenance (PM) and 
testing for Joint Commission on Accreditation of Healthcare Organizations 
(JCAHO). PM and testing not only meet JCAHO requirements but will help 
make sure of a long, operative life for the Basic Care™ Bed. PM will minimize 
downtime due to excessive wear.

The following PM schedule guides you through a normal PM procedure on the 
Basic Care™ Bed. During this PM process, check each item on the schedule, 
and make the necessary adjustments.

Follow the PM schedule with the corresponding PM checklist. This checklist is 
designed to keep a running maintenance history and subsequent repair costs for 
one Basic Care™ Bed. However, your facility can change this checklist or 
design another if necessary. Keeping close records and maintaining the Basic 
Care™ Bed are two effective ways to reduce downtime and make sure the 
patient remains comfortable.

Summary of Contents for Basic Care P1440

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands