manualshive.com logo in svg

Hill-Rom Basic Care P1440, Service Manual

Share
Download
Hill-Rom Basic Care P1440 Service Manual Download Page 122

Service Parts Ordering

Chapter 5: Parts List

Page 5 - 2

Basic Care™ Bed Service Manual (man336)

Call Hill-Rom Technical Support at 1-812-934-1796 with the following data:

• Six-digit customer account number

• Purchase order number

• Model number

• Serial number

• Part number(s)

To promptly order parts, request part prices and availability, or follow up on a 
service order, use the following Hill-Rom fax number:

812-934-8472

Terms:

• Net 60 days

• F.O.B. Batesville, IN

• Prepaid shipping charges added to invoice

• All orders shipped by Hill-Rom nominated unless specified

Address all inquiries to:

ATTN TECHNICAL SUPPORT—PARTS
HILL-ROM COMPANY, INC.
1069 STATE ROUTE 46 E
BATESVILLE IN 47006-9167

Address all return goods to:

ATTN SERVICE STORES
DISTRIBUTION CENTER DOOR D23
HILL-ROM COMPANY, INC.
COUNTY ROAD 300E
BATESVILLE IN 47006-9167

NOTE:
To eliminate possible delays or incorrect billings, do not return any items 
without a Return Material Authorization (RMA) number. When a return is 
requested, an RMA packet is included with each order. This packet includes an 
RMA number, instructions, and a shipping label. If an RMA number is not 
available, get one by calling Hill-Rom Technical Support at 1-812-934-1796.

Summary of Contents for Basic Care P1440

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands