manualshive.com logo in svg

Hill-Rom Basic Care P1440, Service Manual

Share
Download
Hill-Rom Basic Care P1440 Service Manual Download Page 113

4.24  Central Brake and Steer—Pedal Assemblies

Chapter 4: Removal, Replacement, and Adjustment Procedures

Basic Care™ Bed Service Manual (man336)

Page 4 - 57

4

4.24 Central Brake and Steer—Pedal Assemblies

Tools required:

2.5 mm Allen™

1

 wrench

5 mm Allen™ wrench
13 mm nut driver
Rubber mallet

Removal

1. Disconnect the battery cable from the control board (refer to procedure 4.7 

on page 4-16).

SHOCK HAZARD:

Disconnect the bed from its power source. Failure to do so could result 
in personal injury or equipment damage.

2. Disconnect the bed from its power source.

3. Put the central brake and steer pedals (A) in the neutral position (see figure 

4-25 on page 4-58).

4. Remove the two screws (B) attaching the two pedals (A) to the hex rod (C).

5. Remove the two pedals (A) from the hex rod (C).

6. Loosen the two setscrews (D) attaching the two metal bushings (E) to the 

hex rod (C).

NOTE:
It is not necessary to remove the setscrews.

7. Remove the two metal bushings (E) and the two plastic bushings (F) from 

the hex rod (C).

8. Loosen the setscrews (G) in the two rocker arms (H).

9. Push the hex rod (C) completely out of the bed frame (I).

10. Remove the bolts (J) and nuts (K) attaching the two head linkages (L) and 

one foot linkage (M) to the two rocker arms (H).

1. Allen™ is a trademark of Industrial Fasteners, Inc.

Summary of Contents for Basic Care P1440

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands