manualshive.com logo in svg

Hill-Rom Basic Care P1440, Service Manual

Share
Download
Hill-Rom Basic Care P1440 Service Manual Download Page 3

Basic Care™ Bed Service Manual (man336)

 Page i

© 2004 by Hill-Rom Services, Inc. ALL RIGHTS RESERVED.

Manufactured for Hill-Rom by: Optima Healthcare Inc.

Distributed by:

HILL-ROM COMPANY, INC.
1069 STATE ROUTE 46 E
BATESVILLE, IN 47006-9167

No part of this text shall be reproduced or transmitted in any form or by any 
means, electronic or mechanical, including photocopying, recording, or by any 
information or retrieval system without written permission from Hill-Rom 
Services, Inc. (Hill-Rom).

The information in this manual is confidential and may not be disclosed to 
third parties without the prior written consent of Hill-Rom.

First Edition

First Printing 2004

Printed in the USA

Allen™ is a trademark of Industrial Fasteners, Inc.

Basic Care™ is a trademark of Hill-Rom Services, Inc.

CSA® is a registered trademark of Canadian Standards Association.

Hill-Rom® is a registered trademark of Hill-Rom Services, Inc.

Oilite® is a registered trademark of Beemer Precision, Incorporated.

Slo-Blo® is a registered trademark of Littelfuse, Inc.

Teflon® is a registered trademark of E.I. du Pont de Nemours and Company.

Torx® is a registered trademark of Textron, Inc.

The information contained in this manual is subject to change without notice. 
Hill-Rom makes no commitment to update or keep current, the information 
contained in this manual.

Summary of Contents for Basic Care P1440

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands