manualshive.com logo in svg

Hill-Rom Basic Care P1440, Service Manual

Share
Download
Hill-Rom Basic Care P1440 Service Manual Download Page 47

2.11  The Automatic Contour Up Function Does Not Operate

Chapter 2: Troubleshooting Procedures

Basic Care™ Bed Service Manual (man336)

Page 2 - 21

2

2.11 The Automatic Contour Up Function Does Not Operate

1. The head section does not rise when the control for the auto contour up is 

pressed.

Yes

No

↓

→

Go to step 4.

2. The head function lockout is off.

NOTE:
If the LED for a bed function lockout is on, the function is locked out.

Yes

No

↓

→

Turn the head function lockout off. If this corrects the problem, 
go to “Final Actions” on page 2-4. 

3. Do the procedure on page 2-6. The head section rises when the control for 

the auto contour up is pressed.

Yes

No

↓

→

Call Hill-Rom Technical Support at 1-812-934-1796.

4. The knee section does not rise when the automatic contour up switch is 

pressed.

Yes

No

↓

→

Turn the knee function lockout off. If this corrects the problem, 
go to “Final Actions” on page 2-4. Otherwise go to step 5.

NOTE:
If the LED for a bed function lockout is on, the function is locked out.

5. Do the procedure on page 2-11. If this corrects the problem, go to “Final 

Actions” on page 2-4. Otherwise, call Hill-Rom Technical Support at 
1-812-934-1796.

Summary of Contents for Basic Care P1440

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands