4.11 Hilow Motor
Chapter 4: Removal, Replacement, and Adjustment Procedures
Page 4 - 26
Basic Care™ Bed Service Manual (man336)
Figure 4-11. Hilow Motor
8. Remove the bolt (F), nut (G), and two spacers (H) attaching half of the
hilow motor (B) to the bed frame (E).
9. Remove the retaining ring (K), washer (L), and pin (M) attaching the other
half of the hilow motor (B) to the bed frame (E).
Replacement
CAUTION:
Keep enough slack in the cables to allow the bed to move through its
full range of motion without putting force on any of the cables. Failure to
do so could result in equipment damage.
1. When routing the cables, make sure they have enough slack for the bed to
move through its full range of motion.
2. Do the removal procedure in the reverse order.
3. Do the “Function Checks” on page 2-2.
026
