4.27 Sleep Surface Panels
Chapter 4: Removal, Replacement, and Adjustment Procedures
Page 4 - 62
Basic Care™ Bed Service Manual (man336)
4.27 Sleep Surface Panels
Tools required:
Screwdriver
Removal
1. Raise the bed to the highest position.
2. Lower the head and knee sections to their lowest positions.
3. If you are replacing a seat panel (A) or thigh panel (B), do the following
(see figure 4-28 on page 4-62):
a. Remove the four retaining rings (C) and four pins (D) attaching the
panel (A) or (B) to the bed frame (E).
b. Remove the panel (A) or (B) from the bed frame (E).
Figure 4-28. Sleep Panels
4. If you are replacing a foot panel (F), do the following:
a. Remove the two footrails (G) from the bed frame (E) (refer to
035
