607 Series Face Recognition Terminal
User Manual
108
1)
Select the template of the authentication group from the dropdown list. For details about
setting the template, refer to Chapter 7.6 Schedule and Template.
2)
Select the authentication type of the authentication group from the dropdown list.
Local Authentication: Authentication by the access control device.
Local Authentication and Remotely Open Door: Authentication by the access control
device and by the client.
For Local Authentication and Remotely Open Door type, you can check the checkbox
to enable the super password authentication when the access control device is
disconnected with the client.
Local Authentication and Super Password: Authentication by the access control
device and by the super password.
3)
In the list on the left, the added card group will display. You can click the card group and
click
to add the group to the authentication group.
You can click the added card group and click
to remove it from the authentication
group.
You can also click
or
to set the card swiping order.
4)
Input the Card Swiping Times for the selected card group.
Notes:
The Card Swiping Times should be larger than 0 and smaller than the added card
quantity in the card group.
The upper limit of Card Swiping Times is 16.
5)
Click OK to save the settings.
7.
Click Save to save and take effect of the new settings.
Notes:
For each access control point (door), up to 20 authentication groups can be added.