Home
/
HIKVISION
/
607 Series
/
User Manual

HIKVISION 607 Series, User Manual, Page: 135 / 163

Share

Page: 135 / 163

HIKVISION 607 Series User Manual Download Page 135

607 Series Face Recognition Terminal

User Manual

125

The following buttons are available on the local playback page:

CIF/4CIF

Display the video in cif/4cif resolution.

Full Screen

Display the local playback page in full screen mode.

Close

Close the local playback page of the video files.

Pause/Play

Pause/Start the playback of the video files.

Stop

Stop the playback of the video files.

Speed

Set the playback speed.

Single Frame

Play back the video files frame by frame.

Digital Zoom

Enable the digital zoom function. Click again to
disable.

Enable/Disable

Audio

Click to enable/disable the audio in the local
playback.

Capture

Capture the picture in the playback process.

Capturing Picture in Live View

Steps:
1.

Move the mouse pointer to the display window in live view to show the toolbar.

2.

Click the icon

in the toolbar of the display window or on the right-click Live View

Management Menu.
A small window of the captured picture will be displayed to notify whether the capturing
operation is done or not.

Note:

The saving path of the captured pictures can be set on the System Configuration interface.

For details, refer to User Manual of iVMS-4200 Client Software.

Viewing Captured Pictures

The pictures captured in live view are stored in the PC running the software. You can view the
captured pictures if needed.
Steps:
1.

Click File->Open Image File to open the Captured Images page.

2.

Select the camera to be searched from the Camera Group list.

3.

Click the icon

to specify the start time and end time for the search.

4.

Click Search. The pictures captured between the start time and end time will be displayed.

5.

Double-click the captured picture to enlarge it for a better view.
Select the captured picture, and click Print. You can print the selected picture.
Select the captured picture, and click Delete. You can delete the selected picture.
Select the captured picture, and click Send Email. You can send an Email notification with the
selected picture attached.
Select the captured picture, and click Save as. You can save a new copy of the selected picture.

7.12.3

Other Functions in Live View

There are some other functions supported in the live view, including, two-way audio, camera

«
...
133
134
135
136
137
...
»

Summary of Contents for 607 Series




































































































































































Reviews:

No comments