607 Series Face Recognition Terminal
User Manual
37
The system supports the USB flash drive with the storage of 1 G to 32 G. Make sure the
free space of the USB flash drive is more than 512 M.
The exported user data is a BIN file, which cannot be edited.
Importing Data
Steps:
1.
Plug a USB flash drive in the device.
2.
On the Transfer page, tap Import User Data, Import Face Pic., or Import Access Control
Param.
3.
Tap Yes on the pop-up window and the data will be imported from the USB flash drive to the
device.
Notes:
If you want to transfer all user information from one device (Device A) to another (Device
B), you should export the information from Device A to the USB flash drive and then import
from the USB flash drive to Device B. In this case, you should import the user data before
importing the profile photo.
The supported USB flash drive format is FAT 32.
The imported picture should be saved in the root directory (enroll_pic) and the picture
file’s name should be follow the rule below:
Card No._Name_Department_Employee ID_Gender.jpg
The employee ID should between 1 and 99999999, should not be duplicated, and should
not start with 0.
Requirements of face picture: It should be taken in full-face view directly facing the camera.
Do not wear a hat or head covering when taking the face picture. The format should be
JPEG or JPG. The resolution should be 640 × 480 pixel or more than of 640 × 480 pixel. The
picture size should be between 60 KB and 200 KB.
6.6.4
Viewing System Information
Viewing Capacity
Purpose:
You can view the added user’s number, the face picture’s number, the card’s number, the
password’s number, and the fingerprint’s number.
Note:
Some models do not support displaying the fingerprint capacity.
Tap Info. (System Information) -> Capacity on the Home page to enter the Capacity page.