607 Series Face Recognition Terminal
User Manual
28
Setting Fingerprint Parameters
Purpose:
You can set the fingerprint security level in this section.
Note:
Only the device with the fingerprint scanning function supports the fingerprint related
function.
Security Level: You can select the fingerprint security level.
The higher is the security level, the lower is the false acceptance rate (FAR).
The higher is the security level, the higher is the false rejection rate (FRR).
The security level related false acceptance rate is shown as below:
Fingerprint Security Level
FAR
1
0.1%
2
0.003%
3
0.001%
4
0.0003%
5
0.0001%
Upgrading Firmware
On the Upgrade page, plug in the USB flash drive and tap Start. The device will automatically read
the upgrading file in the USB flash drive and upgrade the firmware.
Note:
The upgrading file should be in the root directory.
The upgrading file name should be digicap.dav.