Smart Relay Load Wiring
Like the OmniPL’s internal relays, a Smart Relay can be used to control either 115 or 230 VAC pool
equipment. Refer to the wiring information below.
Smart Relays are sold separately and include an electrical box and Wiring Whip. If not using the
included box, install the Smart Relay (HLH485RELAY) into an electrical box with a minimum volume
of 16.2 in
3
. Use the included Wiring Whip if the electrical box will be mounted within 6 ft of the power
source. Red, black and green conductors are included for 230 VAC wiring. A white conductor is
supplied if using 115 VAC input power. Use the included wire nuts for wiring connections. Use proper
threaded strain relief fittings when attaching conduit to knockouts. After wiring is complete, carefully
insert the cover with connections into the box and secure.
Red
Red/White
Black
Black/White
Gray
Neutral
Load out
No Connection
No Connection
115 VAC
Load 2 out
Load 1 out
Line 1 in
230 VAC
Line in
Connect Gray &
Red to Line 2 in
Smart Relay
Wire Colors
Gray
Black
Black/White
Red
Red/White
Line 1 in
Neutral
Load 1 out
Neutral
Gray
Black
Black/White
Red
Red/White
Line 1 in
Line 2 in
Load 1 out
Load 2 out
230 VAC
115 VAC
19
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
