Dispenser Type -
Select the type of dispenser used (T-CELL model, liquid chlo-
rinator or tablet feeder).
Dispenser Relay or Valve -
Depending on your dispenser type, select the output
that controls the dispenser.
ORP Timeout -
Choose the ORP timeout time and desired ORP setpoint. This
option is only available if ORP controls chlorination.
Delete Chem Sense Module/Chlorination -
From this screen, if you wish to de-
lete any currently configured chemistry options, select the trash can on the right of
the name of the item that you wish to delete.
NOTE: If either pH dispensing or chlorination are not configured, then this screen will
give you the option to “Add CSM” or “Add Chlorination.” If either of those options are
selected, then you will be taken through the full configuration for that equipment as
appears in the Configuration Wizard portion of this manual.
If Cleaners is selected:
Add Cleaner -
Pressing “Add Cleaner” from this screen will take you through the full
configuration for adding a new cleaner. These steps are described in the Configura-
tion Wizard portion of this manual.
Select a Cleaner -
Once you select a cleaner, all of the options for that cleaner will
appear on the next screen. These options are as follows:
Name -
Rename the cleaner to whatever name you desire.
Type -
Select the type of cleaner that is configured (Pressure, Suction, Robotic,
In Floor).
Pump -
Configure the cleaner pump, if used.
Relay -
Select the relay that the cleaner is wired to. This option only appears if
the cleaner does not have an associated pump configured.
Valve -
Configure the cleaner valve, if used.
Freeze Protect -
Select whether you want the cleaner to turn on for Freeze Pro-
tection. Also set the Freeze Protect air temperature threshold from this menu.
Valve Cycle -
Configure the valve cycling time period for the cleaner. This option
is only available if the cleaner has an assigned valve.
Speed -
Change the Minimum and Maximum Allowed Speeds of the cleaner as
53
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
