HL-CHEM ORP and pH Sensing Kit
Plug in the connector from the HL-CHEM into one of the Low Speed Bus connectors on the main
PCB in the OmniPL Control Center as shown below. Refer to the HL-CHEM manual for complete
installation instructions.
Home Router
Connect Probe Cell cable here
Route cable
through
access hole
Route
though
knockout
Ethernet port
Router
LAN port
Connection to the web is optional.
If web enabled devices such as
PCs, laptops, tablets or phones
will be used to access the OmniPL,
an Ethernet or wireless connec-
tion must be made to the home
router. For wireless connections,
refer to the Configuration section
of this manual. For Ethernet con-
nections, use outdoor rated Cat5e
or Cat6 Ethernet cable. Connect
one end to the Controller and the
other to an available LAN port (not
WAN) on the home router or ac-
cess point.
23
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS