If Standalone Lights is selected:
Add Standalone Light -
Pressing “Add Standalone Light” from this screen will take
you through the full configuration for adding new lights. These steps are described
in the Configuration Wizard portion of this manual.
Select an Existing Group of Lights -
Once you select a group of existing lights,
all of the options for those lights will appear on the next screen. These options are
as follows:
Name -
Rename the group of lights to whatever name is desired.
Type -
Select the type of lights configured.
Relay -
Select the relay(s) that the group of lights is wired to.
Set Mode -
Set the mode of the lights configured.
Omni Direct
- If UCL was previously selected, this button will appear and allow
you to test whether your UCL lights are Omni Direct compatible (lights built after
June 2018).
Delete an Existing Group of Lights -
From this screen, if you wish to delete a
group of lights that is currently configured, select the group and then select the trash
can button next to it.
If Accessories is selected:
Add Accessory -
Pressing “Add Accessory” from this screen will take you through
the full configuration for adding a new accessory. These steps are described in the
Configuration Wizard portion of this manual.
Select an Accessory -
Once you select an accessory, all of the options for that ac-
cessory will appear on the next screen. These options are as follows:
Name -
Rename the accessory to whatever name you desire.
Type -
Select the type of accessory configured (Laminar, Water Feature, etc.).
Pump -
Configure the accessory pump, if used.
Valve -
Configure the accessory valve, if used.
Speed -
Change the Minimum and Maximum Allowed Speeds of the accessory
pump as well as the Low, Medium and High Speed settings. This option only
appears if the accessory pump is configured as a Variable Speed Pump.
Priming -
Select whether you want the accessory pump to prime. This option
is only available if the accessory pump is configured as a 2-Speed or Variable
Speed Pump.
55
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
