ured):
This interlock prevents Spillover mode when an external input (most commonly a pool
cover sensor) is actuated. By interlocking Spillover to the pool cover sensor, you’ll
ensure that water cannot spill into the pool when the cover is in the closed position.
A summary screen will be displayed after configuring this interlock. Read through the
description and make sure the interlock will function as desired.
If Pool Cover Interlock is selected (if using an automatic pool cover):
This interlock makes it easy to assign specific pool settings when the cover is closed.
Pump speed, heater temperature and chlorination percentage can all be preset for
periods when the pool cover sensor (external input) detects that the cover is closed.
Some or all of these options may not appear if you don’t have a variable speed pump,
heater or if not using chlorination. An alternative to this interlock is using a Theme
to Sensor interlock. Create a Theme using desired settings when the pool cover is
closed, then interlock the Theme to the pool cover sensor. A summary screen will
be displayed after configuring this interlock. Read through the description and make
sure the interlock will function as desired.
Quick Edit Guide
If additional pool or backyard equipment is added after initial configuration, or you’d like to make a
change to an existing configuration setting, re-enter the Configuration Wizard and select “Edit”. Af-
ter selecting “Edit”, you will be brought to the Quick Edit Main Menu screen as shown below. Quick
Edit allows you to go directly to the equipment that you’d like to add/remove/configure. When you
have finished editing the configuration, you will return to this screen to save your changes.
Navigation
There are a number of additional buttons that appear in Quick Edit that either have functions unique
to Quick Edit or do not appear anywhere else in the system. These buttons are as follows:
Save
- Touch this button to save the configuration edit. This button only appears on the
Quick Edit Home screen.
Cancel
- Touch this button to cancel any changes made to the configuration and exit
Quick Edit. This button only appears on the Quick Edit Home Screen.
Home
- Touch this button to quickly jump back to the Quick Edit Main Menu Screen to
save your changes. This button appears at the end of every configuration pathway.
QUICK EDIT
configuration
Main Menu
Bodies of Water
Backyard
Sensors
Add Interlock
System Options
Spa Side
Pre Programmed Config (VSP, Htr, Lt)
New Typical Configuration
New Advanced Configuration
QUICK EDIT
configuration
Edit Current Configuration
49
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS