back to the main menu and continue with the Configuration Wizard.
External Antenna
- Make this selection when setting up a Hayward HLWLAN. Once the system
is done running through the diagnostics, press the check mark to continue to the next section
of the Configuration Wizard.
Not Now
- Skip network setup and continue with Configuration Wizard.
Time and Date
- Time and date can be set manually or you can choose to have it updated auto-
matically from the internet. When registering the VS Omni and creating a web account, you’ll be
prompted to enter a Time Zone. Be sure to enter the same time zone as the physical location of the
VS Omni, otherwise schedules and timers will be inaccurate.
Select Desired Units of Measure
- If Standard is selected, temperatures will be displayed in Fahr-
enheit. If Metric is selected, temperatures will be displayed in Celsius.
MSP ID
- The OmniPL MSP ID number will be displayed. This unique number is used to identify
your OmniPL when setting up a web account. A web account is needed to access the OmniPL over
the web by mobile devices.
IMPORTANT:
write down the MSP ID number for future use. The MSP
ID number will be needed when entering the configuration wizard after initial configuration as well
as entering and exiting Simple Mode. Simple Mode is a customizable screen that can be set up for
quick access to pool/spa functions and features.
How many Bodies of Water?
The OmniPL can support one or two bodies of water, typically a pool
and spa. Select the number and advance. You’ll be brought to a screen where you can add, delete
or edit a Body of Water. When initially configuring the OmniPL, a “?” will appear in the Body of Water
button. You will have to configure this body of water by selecting it and then touching the Advance
button. When finished configuring bodies of water, you’ll be returned to this same screen. Touch
the Done button and advance to the next section of configuration.
IMPORTANT:
The following instructions are for Body of Water 1 configuration. When finished with
the first Body of Water, you’ll follow the same instructions for the second Body of Water. When
configuring the second Body of Water, you’ll have the option of using “Shared Equipment”. If Shared
Equipment is enabled, the second Body of Water will use the filter pump as well as other equipment
(heater, chlorinator, etc.) that has been assigned to the first Body of Water. Additionally, you will have
the option for using “Shared Heaters”. If you have dual equipment with shared heaters, this can be
configured from the second Body of Water’s configuration menu. See page 45 for more information
regarding Shared Equipment in the second Body of Water configuration menu.
What is the Body of Water type?
Select the type of Body of Water that you would like to configure.
The choices are Pool and Spa.
Name of Body of Water
- Selecting the box will allow you to edit the name. During initial
configuration, the box will be blank. Select the box and then use the keyboard to enter the
desired name of the body of water.
31
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
