P-KIT
Chlorination plumbing kit containing flow switch and cell unions
AQR940/AQR925 Aqua Rite chlorine generator for additional chlorination (requires HLAQRPCB)
V&A-xx
Valve & Actuator (xx=1P (1.5” pos. seal), -2P (2” pos. seal)
CL200
Chlorine tablet feeder
Overview
The Hayward OmniPL is a web enabled pool automation control with a convenient touchscreen in-
terface. Automatically and remotely control pumps, heaters, valve actuators, pool and yard lighting,
pool chemistry equipment and more. The OmniPL offers the next generation of technology to man-
age pool/spa equipment, allowing communication to web connected computers and mobile devices.
You can now conveniently monitor your pool/spa and change settings anytime, and from anywhere.
Please read this manual thoroughly before attempting to install, configure or operate this unit. The
functions and features described in this manual assume that the OmniPL is using the latest firmware
version available from Hayward.
Features
The standard Hayward OmniPL offers the following functionality:
• 100A service subpanel with 8 circuit breaker capacity
• 4 high voltage (120/240V) relays to control pumps, pool lights, yard lights, water features,
chemical dispensers and more (2 additional internal relays and 2 external Smart Relays can be
added for up to 8 total)
• control up to 4 automatic valve actuators including pool and spa valves, water feature valves,
cleaner valves and more
• control up to 4 heaters or low voltage equipment including gas heaters, electric heat pumps, and
solar heaters as well as various low voltage devices
• controls up to 8 variable speed pumps* (VSPs) without the use of a relay
• up to 5 external inputs; 3 for temperature sensing, 2 for external input devices
• built-in wireless and Ethernet port for connection to the home’s router/access point allowing
communication to devices on the home network or on the web
• connection for Hayward TurboCell used to generate chlorine
• connection for a flow switch to detect water flow (GLX-FLO)
• input for ORP and pH sensing (HL-CHEM)
• control an optional Hayward Aqua Rite salt chlorinator for additional chlorination. If controlled by
the OmniPL, the Aqua Rite must have a HLAQRPCB communication board installed
Optional accessories (page 2) can expand the functionality of the OmniPL. Determine your needs
and select the necessary accessories before you begin the installation.
Equipment
OmniPL Wiring Panel
The Wiring Panel contains a 100A subpanel which will be connected to the main service. The
included high voltage relays (and optional external Smart Relays) are used to automate high volt-
age pool equipment like lights, water features, pumps and more. The remaining connections to the
3
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS