GRAUPNER MX-16S, Programming Manual

Page: 51 / 116

51
Tips:
When assigning the switches please take care to set
them to the appropriate direction of travel, and ensu-
re that all inputs not required are left at or set to “free”,
to eliminate the possibility of errors if unused transmitter
controls are operated accidentally.
You can alter the effective end-points of an assigned
switch by adjusting servo travel as described in the next
section.
After you have assigned an external switch, the screen
displays either the transmitter control number or the
switch number, followed by a switch symbol which indi-
cates the direction of operation, e.g.:
Column 3 “-”
Hold the SELECT button pressed in, and use the right-
hand rocker button to select one of the inputs 5 to 8.
Use the right-hand rocker button to select
SYM or ASY
in the “-” column, and press the SELECT button
to activate travel adjustment:
You can now use the right-hand rocker button to set the
control travel within the range -125% to +125%, either
symmetrically (
SYM ) to both sides, or asymmetrically
( ASY ). At the same time you can use the software to re-
verse the direction of effect of the transmitter control. If
you wish to make asymmetrical adjustments, you must
move the transmitter control or switch in the appropria-
te direction before altering the setting. When the fi eld is
highlighted, you can change the setting.
Pressing
CLEAR resets the control travel in the highligh-
ted fi eld to 100%.
Important:
In contrast to servo travel adjustments, changing the
transmitter travel setting affects all mixer and coupling
inputs, i.e. all servos which are affected by that transmit-
ter control.
Control settings – Fixed-wing model