3–40
AP0902
Operation
Towing
WARNING!
Turning the steering wheel requires greater effort if the diesel engine breaks
down. Take this into account, especially when towing the machine!
☞
Use a towing rod!
Important!
Important!
Important!
Important!
The hydrostatic drive may be damaged if the machine is towed in this
condition!
☞
Switch off the engine!
☞
Short-circuit the hydraulic circuit before towing (see below)
☞
Do not tow the machine for more than 100 yards (100 meters) and do not
tow it faster than 2-3 mph (3 – 4 km/h)!
☞
Tow the machine as follows:
•
Move drive lever to neutral – see Driving direction selector switch on page 3-8
•
Apply the parking brake (
➠
page 3-10)
•
Switch off the engine
•
Attach an adequately sized towing rod to the towing facilities
☞
Change over the valves on hydraulic pump A. To do this:
•
Depress buttons B
NOTE:
The HP valve changeover is automatically reversed when the machine is placed
back into service, as soon as the engine is started.
Fig. 74: Hydraulic pump when towing the machine
A
B
Summary of Contents for 418T Wheel
