![background image](http://html1.mh-extra.com/html/gehl/418t-wheel/418t-wheel_operators-manual_2205856062.webp)
AP0902
3–25
Operation
3.4.8
Differential lock
NOTE:
A differential lock neutralizes the compensating effect of the differential, i.e. trac-
tion is distributed evenly to the front and rear wheels. Both the front and rear axles
of the machine are fitted with self-locking differentials. The locking value is 40% for
each axle. The differentials are locked automatically. The differential lock cannot
be engaged or disengaged by the operator! If a wheel loses contact with the
ground, the differential lock on the respective axle is no longer effective!
3.4.9
Stopping the machine
☞
Proceed as follows:
•
Throttle back the engine: Take your foot off accelerator pedal 16/6
•
Stop the machine with service brake 16/3
•
Move drive lever to neutral – see Driving direction selector switch on page 3-8
•
Apply the parking brake. To do this:
Pull up lever 16/25 to the last notch
➥
Warning Light 19/41 comes on
Summary of Contents for 418T Wheel
