![background image](http://html1.mh-extra.com/html/gehl/418t-wheel/418t-wheel_operators-manual_2205856070.webp)
AP0902
3–33
Operation
3.4.16
Seat belt
WARNING!
Do not operate machine with the seat belt unbuckled to avoid personal injury.
☞
Buckle up before moving or using the machine!
• Seat belt must not be twisted!
• Seat belt must run over the hips – not over stomach – and must always
be applied tightly!
• Do not place seat belt over hard edged or fragile items (tools, glasses,
pen) carried inside your clothes!
• Never buckle up 2 persons (children!) with a single seat belt!
• Check seat belts regularly. Have damaged parts immediately replaced!
• Always keep seat belt clean, as dirt may impair proper functioning!
• Seat belt buckle must not be obstructed otherwise the buckle latch can-
not lock into place!
WARNING!
After an accident the belt strap may be stretched, and is no longer serviceable.
In an accident, the seat belt will not provide adequate protection!
☞
Replace the seat belt after an accident
☞
Have fastening points and seat fixture checked for loading capacity!
The seat belt 29 is designed for the driver's safety during work on construction sites and
during road travel.
To fasten seat belt 29
☞
Before starting, fasten seat belt 29 as follows:
•
Hold belt on the buckle latch A and run it slowly and steadily over the hips to the
buckle B
•
Insert buckle latch A into the buckle B until it engages audibly (pull test)
•
Tighten seat belt by pulling at its end
➥
The seat belt must always be tightly in place over the hips!
30763b0007.eps
Fig. 63: Fastening the seat belt
29
B
A
Summary of Contents for 418T Wheel
