2–12
AP0902
Safety instructions
Hydraulic equipment
•
Work on the hydraulic equipment of the machine may be done only by persons having
knowledge and experience in hydraulic systems!
•
Check all lines, hoses and connections regularly for leaks and damage! Repair any
damage and leaks immediately! Leaking oil may cause injury and fire.
•
In accordance with the operator’s manual/instructions for the assembly, relieve the
pressure in all system sections and pressure pipes (hydraulic system, ) to be opened
before doing any repair work!
•
Hydraulic lines must be routed and fitted properly. Ensure that no connections are inter-
changed. The fittings, lengths and quality of the hoses must comply with the design
specifications.
Noise
•
Wear hearing protection if necessary!
Oil, grease and other chemical sub-
stances
•
When handling oil, grease and other chemical substances (e.g., battery electrolyte —
sulfuric acid), observe the product-related safety regulations (material safety data sheet
MSDS)!
•
Be careful when handling fluids, because of the risk of burning or scalding!
Battery
When handling the battery, observe the specific safety instructions to avoid injury. Batter-
ies contain sulfuric acid.
•
Especially when charging batteries, as well as during normal operation, a hydrogen-air
mixture is formed in the cells which has a danger of explosion!
•
In the case of a frozen battery or of an insufficient electrolyte level, do not try start-up
with jumper cables. The battery can burst or explode.
Tires
•
Repair work on tires and rims may be carried out by skilled personal or by an autho-
rized workshop only!
•
Damaged tires and/or wrong tire pressure reduce the operational safety of the
machine. Therefore conduct regular checks of the tires for
•
Prescribed tire pressure and
•
Damage
•
Do not inflate tires with inflammable gas – danger of explosion!
•
Conduct regular checks of the wheel nuts for tightness, at least every 600 service
hours. After changing tires check the wheel nuts after 10 service hours – tighten if
necessary!
Summary of Contents for 418T Wheel
