5–28
AP0902
Maintenance
5.10 Telescopic unit
5.10.1
Lubricating the pivot points of the telescopic unit
If machine is in uninterrupted use
☞
Lubricate the grease nipples (circles in figure 163) every 10 service hour (or daily)
with grease
If machine is in occasional use
☞
Lubricate the grease nipples (circles in figure 163) every 50 service hours (or once a
week) with grease
5.10.2
Lubricating the telescopic unit
Lubricate the pad tracks at regular intervals.
Recommended lubricant – see section 5.15 Engine fluids and lubricants on page 5-39
☞
Before lubricating:
Completely extend the telescopic unit
☞
If machine is in uninterrupted use
•
Grease the pad tracks every 10 hours
☞
If machine is in occasional use
•
Grease the pad tracks once a week
Fig. 163: Telescopic unit with lubrication points
A
B
C
D
A
B
Fig. 164: Wear pads of the telescopic unit
Summary of Contents for 418T Wheel
