![background image](http://html1.mh-extra.com/html/gehl/418t-wheel/418t-wheel_operators-manual_2205856034.webp)
AP0902
2–11
Safety instructions
2.6
Warning of special hazards
Electrical hazards
•
Use only original fuses with the specified current rating!
Turn off the machine immediately and correct the malfunction if trouble occurs in the
electrical system!
•
When working with the machine, maintain a safe distance from overhead electric lines!
If work is to be carried out close to overhead lines, the equipment/attachments must be
kept well away from them. Learn the prescribed safety distances!
•
If your machine comes into contact with an electrical wire:
•
Do not leave the machine
•
Drive the machine out of the area of danger, if possible
•
Warn others against approaching and touching the machine
•
Have the electrified wire de-energized
•
Do not leave the machine until the electrified wire has been safely de-energized!
•
Work on the electrical system may only be performed by a skilled technician, in accor-
dance with the applicable electrical system repair procedures.
•
Inspect and check the electrical system of the machine at regular intervals. Defects
such as loose connections or burned cables must be corrected immediately.
•
Observe the operating voltage of the machine!
•
Always remove the ground strap from the battery when working on the electrical system
or when performing welding work!
•
Starting with a battery jump cable can be dangerous if performed improperly. Observe
the safety instructions regarding the battery!
Gas, dust, steam, smoke
•
Operate the machine only in adequately ventilated locations! Before starting internal
combustion engines in enclosed locations, make sure that there is sufficient ventilation!
•
Carry out welding, flame-cutting and grinding work on the machine only if it has been
expressly authorized, because there may be a risk of explosion or fire.
•
Before carrying out welding, flame-cutting and grinding work, clean the machine and its
surroundings from dust and other flammable substances, and be sure that the
premises are adequately ventilated – because of the danger of explosions!
Summary of Contents for 418T Wheel
