![background image](http://html1.mh-extra.com/html/gehl/418t-wheel/418t-wheel_operators-manual_2205856059.webp)
3–22
AP0902
Operation
Service brake
WARNING!
The brake lights at the rear of the machine do not light up when the
• Parking brake is applied
• Machine is braked with its hydrostatic braking effect
☞
When driving on public roads and during work operation, especially for
abrupt brake maneuvers, use the brake inching pedal 16/3 to brake the
machine. Only this causes the brake lights to light up.
Dirt accumulation in the area of the brake pedal can result in brake
malfunctions –
☞
Keep the brake inching pedal 16/3 clean!
☞
Check the service brake action as follows:
•
Before driving machine, press down the brake inching pedal 16/3 to check whether
• After a maximum of half the pedal travel there is a firm resistance to be felt
• Brake lights come on if the brake pedal is pressed down
•
After moving machine, check in the rear view mirror that no one will be hindered by a
brake maneuver
•
Check the brake action at low speed
3.4.6
Driving
NOTE:
The machine can be moved only after releasing parking brake 16/25.
☞
After starting the engine, proceed as follows:
•
Select driving direction with tip switch 18/59 or 18/60
•
Release parking brake 16/25
➥
Warning Light 19/41 goes out
•
Gradually depress accelerator pedal 16/6
➥
Machine moves off
•
Test the brakes at low speed
Summary of Contents for 418T Wheel
