![background image](http://html1.mh-extra.com/html/gehl/418t-wheel/418t-wheel_operators-manual_2205856100.webp)
AP0902
3–63
Operation
Removing material/digging in hard soil
Proceed as follows:
•
Completely retract the telescopic unit
•
Select low drive range
•
Lower bucket to the ground (
115/1). To do this:
Push lever 21 forward (C)
•
Set digging angle
α
slightly flatter (115/2) than for digging in soft soil. To do this:
Push lever 21 to the left (A)
•
Drive the machine forward (115/3) and
•
Press the bucket downward slightly. To do this:
Push lever 21 slightly forward (C)
Once the bucket has penetrated the soil:
•
Set digging angle
α
slightly flatter (116/1). To do this:
Push lever 21 to the left (A), so that:
• Layer being removed is as even as possible and
• To reduce wheel spin
•
Push lever 21 to the left (A), or move it alternately to the left and right (A and B), to
loosen the material
•
Proceed the same as for loading material that is hard to penetrate
Fig. 115: Removing hard soil
2
1
3
21
Fig. 116: Setting the digging angle flatter
1
21
Summary of Contents for 418T Wheel
