![background image](http://html1.mh-extra.com/html/gehl/418t-wheel/418t-wheel_operators-manual_2205856078.webp)
AP0902
3–41
Operation
Loading and transporting the
machine:
WARNING!
To avoid injury, the machine must be loaded and transported properly:
☞
It is essential that you read the safety instructions at the beginning of this
chapter and follow them!
☞
Load as follows:
•
Secure the transport machine with chocks to prevent it from rolling
•
Attach the ramps so that the access angle is as small as possible, and ensure that
they cannot slip
•
Ensure that the loading area is clear and access to it is not obstructed.
•
Ensure that the ramps and the wheels of the wheel loader are free of oil, grease
and ice
•
Start the engine of the wheel loader
•
Raise the front bucket enough so that it will not touch the ramps
•
Carefully drive the wheel loader onto the transport machine
•
Move drive lever to neutral – see Driving direction selector switch on page 3-8
•
Apply the parking brake of the wheel loader
•
Lower the bucket to the loading area with the telescopic unit retracted
•
Ensure that the authorized maximum height is not exceeded
•
Cut off the engine of the wheel loader
•
Secure all tyres of the wheel loader with chocks in front of, behind and at the sides of
each wheel
•
Securely lash the wheel loader onto the loading area using straps and chains of
adequate size at the lashing points provided – see section 1.2 Machine: Overview on
page 1-2
•
Before transporting the machine through heavy rain:
Close the outlet of the exhaust silencer with a simple cap or suitable adhesive tape
•
Make certain that the driver of the transport machine knows the overall height of his
machine before departure!
Summary of Contents for 418T Wheel
