![background image](http://html1.mh-extra.com/html/gehl/418t-wheel/418t-wheel_operators-manual_2205856104.webp)
AP0902
3–67
Operation
Loading the material
☞
Proceed as follows:
•
Adjust the height of the fork arms so that the pallet can be correctly loaded
•
Move carefully forward until the fork frame is in contact with the material
•
Make sure that the pallet is safely loaded on the fork arms
•
Apply parking brake 25
•
Move drive lever to neutral – see Driving direction selector switch on page 3-8
•
Lift the telescopic unit slowly and make sure that the limits of load diagram and safe
load indicator are not exceeded!
•
In case of doubt or danger, lower the load immediately!
•
Tilt the fork frame backwards (1)
•
Completely retract the telescopic unit (2)
•
In transport position, lower the telescopic unit as far as possible (3)
•
Make sure that nothing/nobody is in the way when reversing
•
Engage reverse gear
•
Release parking brake 16/25
•
Reverse slowly from the stack (4)
Fig. 124: Load the material
Fig. 125: Lift the telescopic unit (
Fig. 126: Move the material to transport position
1
2
3
4
Fig. 127: Reverse from the stack
4
Summary of Contents for 418T Wheel
