![background image](http://html1.mh-extra.com/html/gehl/418t-wheel/418t-wheel_operators-manual_2205856137.webp)
5–24
AP0902
Maintenance
5.8.2
Front and rear axle differentials
Environment!
Collect the drained gear oil in a suitable container and dispose of it by an ecologically safe
method!
NOTE:
Only use new sealing rings for oil filler and drain plugs. Drain oil only after running
the machine for a long period of time!
Checking the oil level
☞
Proceed as follows:
• Park the machine on level ground
• Clean and unscrew plugs A
If the oil level is below the opening or if the oil level cannot be seen at all:
• Top up with oil – see section 5.15 Engine fluids and lubricants on page 5-39
If the oil level is correct:
• Tighten plug A with a new sealing ring to ensure an oil-tight seal
Top up the oil level
☞
Proceed as follows:
• Park the machine on level ground
• Clean and unscrew plug 158/A
• Fill with oil until it runs out of the filler opening – see section 5.15 Engine fluids and
lubricants on page 5-39
• Tighten plug 158/A with a new sealing ring to ensure an oil-tight seal
Changing the oil
☞
Proceed as follows:
• Park the machine on level ground when it is at operating temperature
• Place a drip tray under plug 158/B to collect the oil
• Clean and unscrew plug 158/A
• Clean and unscrew plug 158/B
• Completely drain the old oil
• Tighten plug 158/B with a new sealing ring to ensure an oil-tight seal
• Fill with fresh oil at opening 158/A until it runs out of the filler opening –
see section 5.15 Engine fluids and lubricants on page 5-39
• Tighten plug 158/A with a new sealing ring to ensure an oil-tight seal
Rear axle: against the direction of travel!
Fig. 158: Checking the oil level on the front and rear axle
differentials
A
B
Front axle: seen in the direction of travel!
A
B
Summary of Contents for 418T Wheel
