![background image](http://html1.mh-extra.com/html/gehl/418t-wheel/418t-wheel_operators-manual_2205856099.webp)
3–62
AP0902
Operation
Removing material/digging in soft soil
WARNING!
Do not undermine foundations or walls because of the chance of collapse!
☞
Never undermine foundations or walls!
☞
Proceed as follows:
•
Completely retract the telescopic unit
•
Select low drive range
•
Place bucket to the ground (
B). To do this:
Push lever 21 forward (C)
•
Set digging angle
α
(113/1). To do this:
Push lever 21 to the right (B)
•
Drive the machine forward (114/1)
Once the bucket has penetrated the soil:
•
Set digging angle
α
slightly flatter (114/2). To do this:
Push lever 21 to the left (A), so that:
• Layer being removed is as even as possible and
• To reduce wheel spin
•
Proceed the same as for loading loose material
Fig. 112: Lowering the telescopic unit
B
21
α
Fig. 113: Setting the digging angle
1
1
21
Fig. 114: Removing an even layer
2
1
21
Summary of Contents for 418T Wheel
