![background image](http://html1.mh-extra.com/html/gehl/418t-wheel/418t-wheel_operators-manual_2205856090.webp)
AP0902
3–53
Operation
3.5.9
Operation of the telescopic unit
WARNING!
A defective safe load indicator or working at more than 100% of the safe work
load may cause the machine to tilt and may result in an accident.
☞
Check the safe load indicator daily!
☞
A flashing indicator and an audible signal warn of loads exceeding 100%.
The operator must reduce the load below the 100% limit by retracting the
telescopic unit!
Lift
☞
Proceed as follows:
•
Raise the retracted telescopic unit to the required height. To do this:
Pull lever 21 backward (D)
•
Extend the telescopic unit. To do this:
Press the tip switch 63 and hold in this position until the telescopic unit is extended to
the required length
Fig. 97: Lifting the telescopic unit
1
21
Fig. 98: Retract the telescopic unit
2
63
Summary of Contents for 418T Wheel
