3–66
AP0902
Operation
3.5.12
Working with pallet forks
Safety instructions
•
Observe the instructions in Section 3.5.3 „Safe load indicator” on page 3-43. The driver
must be aware of the signals given by the safe load indicator
•
Follow the special instructions in the attachment's operator’s manual!
•
Do not lower the extended telescopic unit from a high fork arm position – always retract
the telescopic unit first
•
Move as close as possible to the material to be loaded
•
Move to the material to be loaded with the wheels aligned straight ahead!
•
If possible, load the material with the telescopic unit retracted, as loading with the
extended unit may affect the stability of the machine!
•
Always work on firm and level ground with sufficient bearing capacity (for a fully loaded
machine)!
•
Never lift the load with only one fork arm!
•
Keep a minimum distance of 6 m between telescopic unit/load and tower lines!
•
Before commencing work, make sure that the fork arms on the fork frame are safely
locked!
•
Do not operate telescopic unit or attachments when driving at high speed!
•
Do not leave the machine with the load lifted and the telescopic unit extended!
Approaching the material
☞
Proceed as follows:
•
Stop the machine immediately in front of the material
•
Apply parking brake 16/25
•
Set drive switch to neutral – see Driving direction selector switch on page 3-8
•
Align the fork arms parallel with the ground
•
Check the distance of the fork arms to the center line (dashed line in figure 123)
The fork arms must be:
• At the same distance to the center line
• As far apart as possible
@@
@@
@@
@@
@@
@@
Fig. 122: Position of machine and tines towards the material
312b0850.eps
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
Fig. 123: Check fork spacing
Summary of Contents for 418T Wheel
