![background image](http://html1.mh-extra.com/html/gehl/418t-wheel/418t-wheel_operators-manual_2205856061.webp)
3–24
AP0902
Operation
Changing direction
WARNING!
Changing direction at high speed and high engine speeds causes the machine
to stop abruptly –
➥
Machine drive system also may be damaged!
☞
Switch direction only when machine us stopped.
☞
Stop the machine. Take your foot off accelerator pedal 16/6
☞
Select new driving direction as follows:
NOTE:
The joystick is in neutral when you start the engine. Neutral is selected after apply-
ing parking brake 16/25 or switching off the engine. Driving direction can be
selected only after releasing the parking brake!
Backup alarm (option)
DANGER!
When backing up with the machine:
Accident hazard!
☞
Make sure that nobody is within the area of danger of the machine when
changing the driving direction!
☞
Do not rely exclusively on the backup warning system (option)!
The backup alarm A, is fitted to the rear top left of the cab. The alarm sounds when
shifting into reverse. The sound level is:
103 dB (A) at a distance of 40 inches (1 m), and at a frequency of 2800 Hz.
21
59
60
61
62
Fig. 41: Driving direction selector switch
Function
Operation
Effect
•
Forward
☞
Press the green tip switch 59
➥
Green LED 61 comes on
•
Reverse
☞
Press yellow tip switch 60
➥
Yellow LED 62 comes on
•
Neutral position
☞
Press both tip switches at the
same time
➥
Both LEDs go out
A
Fig. 42: Backup alarm (option)
Summary of Contents for 418T Wheel
