![background image](http://html1.mh-extra.com/html/gehl/418t-wheel/418t-wheel_operators-manual_2205856101.webp)
3–64
AP0902
Operation
Loading heaped material (non-compacted material)
WARNING!
Digging under heaped material can cause it to collapse.
☞
Never undermine heaped material!
☞
Proceed as follows:
•
Completely retract the telescopic unit
•
Select low drive range
•
Set the cutting blade of the bucket parallel to the ground. To do this:
Push lever 21 to the left or right (A and B)
•
Lower the telescopic unit horizontal to the ground. To do this:
Push lever 21 forward (C)
•
Drive forward
After penetrating the heaped material:
•
Smoothly lift the telescopic unit
•
Keep the bucket level
When the telescopic unit stops raising:
•
Roll back the bucket (118/1)
•
Raise the telescopic unit (118/2)
•
Reverse away from the heaped material (118/3)
•
Lower the telescopic unit to transport position
Loading heaped material (compacted material)
Proceed as follows:
•
Completely retract the telescopic unit
•
Select low drive range
•
Proceed as for non-compacted material, however when raising the telescopic unit
through the heaped material:
•
Roll back the bucket in and out slightly (119/1). To do this:
Move lever 21 alternately to the left and right (A and B)
➥
Material is loosened
Fig. 117: Penetrating the heaped material
21
Fig. 118: Reversing away from heaped material
1
3
2
21
Fig. 119: Heaped compacted material
1
21
Summary of Contents for 418T Wheel
