manualshive.com logo in svg

GE Medical Systems marquette Dash 2000, Operator'S Manual, Page: 95 / 272

Share
Download
GE Medical Systems marquette Dash 2000 Operator'S Manual Download Page 95

 

Revision C 

Dash 2000 Patient Monitor 

4-13 

 2005873-001 

 

If you want to move a call to another level, follow this procedure.  (In this 

example we will change V TACH from a Crisis level to a Warning level.) 

Any changes made with this menu option are temporary and will revert to 

defaults upon discharge. 
NOTE:  Asystole and ventricular fibrillation (V FIB, VTAC) 

cannot be 

moved when in ICU (Adult and Neonatal) Mode. 

1.  Rotate the Trim Knob control to move the pointer in front of V TACH. 
2.  Press the Trim Knob control.  The level for the V TACH call highlights. 
3.  Rotate the Trim Knob control until WARNING is displayed. 
4.  Press the Trim Knob control to complete the change.  The information 

window is reorganized to include V TACH as a WARNING alarm and 

the change is in effect. 

The information window remains open for you to make any other changes. 

5.  When you have completed all changes, move the pointer to RETURN 

and press the Trim Knob control to close the information window. 

 
 

Summary of Contents for marquette Dash 2000

















































































































































































































































































Reviews:

No comments