GE Medical Systems marquette Dash 2000, Operator'S Manual, Page: 75 / 272

Revision C Dash 2000 Patient Monitor 3-11
2005873-001
Request Admit Info
Save Admit Info
Weight and Height
Age
If your monitoring system includes a Lab Access Server with an interface to
hospital information, selecting this option will display patient information
that was entered. (See the figure below.) If your system does not have this
equipment, a message is displayed below the menu when you attempt to
select this option.
AUTOMATIC ADMIT INFORMATION
LAST NAME
FIRST NAME
PATIENT ID
SEX
BIRTH DATE
AGE
HEIGHT
WEIGHT
LOCATION ID
SITE NUMBER DAYTON
RAY
333-33-333
MALE
14 JAN 1948
50
Name, ID, Sex, and Birth Date
come from hospital information.
Age is calculated if a birth date
has been entered.
The remaining information will
be displayed if previously
entered. If necessary you can
add to or change the information
displayed.
034A
MAIN
MENU
REQUEST
ADMIT
INFO
PREV.
MENU WEIGHT:
KG
CHANGE
ADMIT
INFO
HEIGHT:
INCHES
REQUEST ADMIT INFO Information Menu
Verify the accuracy of any displayed information. Use the CHANGE
ADMIT INFO option if any information needs to be corrected or additional
information entered.
NOTE: If you change any information which was supplied automatically,
you may have to notify the appropriate hospital personnel.
This option is displayed only if your monitoring system includes a Lab
Access Server with an interface to hospital information. Selecting this
option will save patient information entered at bedside.
WEIGHT and HEIGHT—these options change the units of measure for
weight and height.
AGE—this option only appears when the monitor is set for Neonatal-ICU
mode. Select it to switch age between weeks, days, or years.