GE Medical Systems marquette Dash 2000 Operator'S Manual Download Page 2

Page: 2 / 272

T-2

Dash 2000 Patient Monitor

Revision C

2005873-001

Trademarks

NOTE:

The information in this manual only applies to Dash 2000

software version 3.

Due to continuing product innovation, specifications in this

manual are subject to change without notice.

Trademarked names appear throughout this document. Rather than list

the names and entities that own the trademarks or insert a trademark

symbol with each mention of the trademarked name, the publisher states

that it is using the names only for editorial purposes and to the benefit of

the trademark owner with no intention of improperly using the trademark.

900 SC, ACCUSKETCH, AccuVision, APEX , AQUA-KNOT, ARCHIVIST, Autoseq,

BABY MAC, C Qwik Connect, CardioServ, CardioSmart, CardioSys, CardioWindow,

CASE, CD TELEMETRY, CENTRA, CHART GUARD, CINE 35, COROLAN, CORO,

COROMETRICS, Corometrics Sensor Tip, CRG PLUS, DASH, Digistore, Digital

DATAQ, E for M, EAGLE, Event-Link, FMS 101B, FMS 111, HELLIGE, IMAGE

STORE, INTELLIMOTION, IQA, LASER SXP, MAC, MAC-LAB, MACTRODE,

MARQUETTE, MARQUETTE MAC, MARQUETTE MEDICAL SYSTEMS,

MARQUETTE UNITY NETWORK, MARS, MAX, MEDITEL, MEI, MEI in the

circle logo, MEMOPORT, MEMOPORT C, MINISTORE, MINNOWS, Monarch

8000, MULTI-LINK, MULTISCRIPTOR, MUSE, MUSE CV, Neo-Trak,

NEUROSCRIPT, OnlineABG, OXYMONITOR, Pres-R-Cuff, PRESSURE-SCRIBE,

QMI, QS, Quantitative Medicine, Quantitative Sentinel, RAC, RAMS, RSVP, SAM,

SEER, SILVERTRACE, SOLAR, SOLARVIEW, Spectra 400, Spectra-Overview,

Spectra-Tel, ST GUARD, TRAM, TRAM-NET, TRAM-RAC, TRAMSCOPE, TRIM

KNOB, Trimline, UNION, STATION, UNITY logo, UNITY NETWORK, Vari-X,

Vari-X Cardiomatic, VariCath, VARIDEX, VAS, and Vision Care Filter are

trademarks of GE Medical Systems

Information Technologies

, Inc., registered in the

United States Patent and Trademark Office.

12SL, 15SL, Access, AccuSpeak, ADVANTAGE, BAM, BODYTRODE, Cardiomatic,

CardioSpeak, CD TELEMETRY®-LAN, CENTRALSCOPE, Corolation, Dash Port

Docking Station, Dash Responder, EK-Pro, EDIC, Event-Link Cumulus, Event-Link

Cirrus, Event-Link Nimbus, HI-RES, ICMMS, IMAGE VAULT, IMPACT.wf,

INTER-LEAD, LIFEWATCH, Managed Use, MARQUETTE PRISM,

MARQUETTE® RESPONDER, MENTOR, MicroSmart, MMS, MRT, MUSE

CardioWindow, NST PRO, NAUTILUS, OCTANET, O2 SENSOR, OMRS, PHi-Res,

Premium, Prism, QUIK CONNECT V. QUICK CONNECT, QT Guard,

SMARTLOOK, SMART-PAC, Spiral Lok, Sweetheart, UNITY, Universal, Waterfall,

and Walkmom are trademarks of GE Medical Systems

Information Technologies

Inc.

Information Technologies, Inc., 2004. All rights

reserved.

Summary of Contents for marquette Dash 2000

















































































































































































































































































Search results

Summary of Contents for marquette Dash 2000

Reviews:

GE Medical Systems marquette Dash 2000, Operator'S Manual, Page: 2 / 272

Search results

Summary of Contents for marquette Dash 2000

Reviews: