GE Medical Systems marquette Dash 2000, Operator'S Manual, Page: 174 / 272

9-6 Dash 2000 Patient Monitor Revision C
2005873-001
Getting to the
Pressure Menu
To display a pressure menu, use the Trim Knob control to select the pressure
parameter label. In this example, we will use the CVP Menu. Remember,
selecting with the Trim Knob control is a two-step process—rotate to highlight,
then press to select.
CVP
349/ -99
mmHg
8
097
Selecting the CVP Parameter Label
The CVP Menu is displayed at the bottom of the screen.
MAIN
MENU
CURSOR
CVP
LIMITS
CHANGE
NAME
CVP
CVP
SCALES:
30
ZERO
CVP
CVP
SETTINGS
098
CVP Menu
With the Trim Knob control, you now can select any of the displayed options:
•
SCALES—change the displayed scale for this pressure.
•
CURSOR—display a new menu for a moveable cursor on the waveform.
•
LIMITS—display a new menu and an information window to adjust
alarm limits.
•
CHANGE NAME—change to another name.
•
ZERO—zero reference transducer.
•
SETTINGS—displays a new menu to adjust BP filter, pulse rate,
transducer calibration, smart BP, and disconnect alarm feature in the
ICU and Operating Room Mode.
These menu options are found in all pressure menus. The only difference is the
site name, for example, CVP Cursor, PA Cursor, etc. More details on each
option are found in this chapter.