GE Medical Systems marquette Dash 2000, Operator'S Manual, Page: 69 / 272

Revision C Dash 2000 Patient Monitor 3-5
2005873-001
Standard Admit Menu
With the Standard application, the monitor is permanently assigned to a
room. The unit name and bed number are assigned during installation. The
options you may need to adjust/enter are shown in the admit menu below.
MAIN
MENU
ADMIT
INFO
XXX
PATIENT
PREV.
MENU
025
ICU ADMIT Menu – STANDARD application
NOTE: XXX=ADMIT if patient is discharged, DISCHARG otherwise.
MAIN
MENU
ADMIT
INFO
NEW
CASE
PREV.
MENU
026
OR ADMIT Menu – STANDARD Application
ADMIT INFO—opens the admit information window and popup menu;
refer to section Admit Info later in this chapter.
ADMIT PATIENT–a direct action menu option that admits the patient.
DISCHARG PATIENT—opens a popup menu to confirm the discharge of
the patient.
NEW CASE—a direct action option which discharges the patient’s
information and, with no additional steps, readies the monitor for the next
patient (new admission).
NOTE: This option is found in OR mode only.
Refer to this chapter, Admit Menu Options, if you need more details on
these menu options.