GE Medical Systems marquette Dash 2000, Operator'S Manual, Page: 40 / 272

1-20 Dash 2000 Patient Monitor Revision C
2005873-001
Parameter Menus
More Menus
Each parameter has its own menu from which to access features. Below is
an example of the ECG parameter menu.
MAIN
MENU
DISPLAY:
LEAD II
RELEARN
ECG
SIZE
1X
QRS
VOLUME:
OFF
ECG
LIMITS
ANALYSIS
SETTINGS
011
ECG Parameter Menu
The Main Menu must be displayed to access a parameter menu.
To access a parameter menu, highlight a parameter label, for example,
ECG, and then press the Trim Knob control.
Each parameter menu is discussed in detail in the specific parameter
chapter.
In the lower left corner of the Main Menu is the MORE MENUS option.
Select this option to display the following menu.
MAIN
MENU
ALARM
CONTROL
PATIENT
DATA
ADMIT
MENU
MONITOR
SETUP
012
MORE MENUS Menu
•
ALARM CONTROL—This option displays a menu which allows you to
view and modify all alarm limits, change alarm levels, and adjust alarm
volume.
•
PATIENT DATA—This option displays a menu which allows you to
view patient data—vital sign history, and graphic trends.
•
ADMIT MENU—This option displays a menu to enter necessary
patient information and admit and discharge the patient to/from the
monitor. In OR mode, this menu item reads NEW CASE SETUP.
•
MONITOR SETUP—This option displays a menu which allows you to
set up the monitor to suit your needs—waveforms displayed, color
scheme, parameters on/off, graph setup, monitor defaults, etc. The
service menu is accessed here also.
Each of these options is covered in more detail in following chapters.